Posted on Leave a comment

Fixed Prices and Our Price Match Promise: How a Garage Roof Should Be Quoted

Get a full impression of the price of your garage before you start, with no surprises.

Written by the Compton Roofs team — a family-owned and managed concrete garage specialist. Our owner has 35 years’ hands-on experience of concrete garages, and our site work is carried out by time-served approved contractors who do this work all week, every week. Last updated: 11 September 2026

TL;DR: We think buying a garage roof should be one of the simplest jobs you organise this year, so we have taken the games out of it. You get one fixed price, in writing, before anything is booked — roof, fitting, removal of the old material and the disposal paperwork included. Nobody sits in your kitchen: most quotations are prepared from a copy of your original paperwork, or from the width and length of the building plus a few photographs sent by WhatsApp. If you hold a written quotation from a comparable specialist for comparable work, tell us and we will do our best to match it — just check that you are comparing the same specification. Asbestos-type material is removed by contractors trained in asbestos awareness Categories A and B and taken to a licensed disposal depot, with the correct paperwork handed to you. Most roofs are stripped and replaced in a single day.

Contents

  1. What does “fixed price” actually mean?
  2. What is included in the price?
  3. Why there are no pushy salespeople
  4. How a remote quotation works
  5. The Price Match Promise, and what to compare
  6. Comparing two quotations line by line
  7. Responsible disposal is included, not extra
  8. One visit, usually one day
  9. Who you are dealing with
  10. FAQs

What does “fixed price” actually mean?

It means one price, in writing, before anything is booked. Not a guide price, not a starting-from figure, and not a day rate that grows while somebody is standing on your roof.

A concrete sectional garage is a manufactured building. Its roof is a known area with a known number of sheets, a known ridge length and a known eaves length, which is why the job can be priced accurately before anybody arrives — provided the person quoting knows these buildings. That is the whole reason a fixed price is possible here when it is not always possible on, say, a house roof: there are no hidden layers and no surprises under the covering on a building type we see every week.

So there are no day-rate surprises and no extras invented halfway through the job. If we have quoted it, that is the price you pay.

From 35 years in the trade: the “extras” people get caught by are nearly always the same three — taking the old roof away, disposing of it legally, and capping and filling the ridge and eaves properly. All three are in our price. When you read any other quotation, those are the three lines to look for.

What is included in the price?

Included in our fixed priceWhat it means on the day
The roofThe replacement covering itself, ordered to your building’s measurements
The fittingInstallation by time-served approved contractors
Removal of the old materialThe old roof comes off and leaves site with the crew
Disposal paperworkThe correct documentation for what has been taken away
Ridge and eaves capping and fillingThe edges finished properly rather than left open
WarrantyFive-year warranty on a system with a typical life of up to 40 years

No prices are published on this page, because a garage roof price depends on the size of your building and the specification you choose. Send the width and length — or your original paperwork — and you will have a figure in writing.

Why there are no pushy salespeople

Nobody will be sitting in your kitchen bearing down on you. There is no commissioned sales visit, no “price that is only good tonight”, and no reason for either.

That matters beyond comfort. A contract agreed in your home is an off-premises contract in law, and the Consumer Contracts (Information, Cancellation and Additional Charges) Regulations 2013 give you a 14-day cancellation right on those and on distance contracts, along with a right to clear information before you commit. High-pressure doorstep selling exists precisely because it works against people who have not had time to think; quoting at a distance removes the pressure entirely and leaves you to compare quotations at your own pace. If you ever do feel pressured by any trader, Citizens Advice consumer helpline is the place to go.

How a remote quotation works

Most quotations are prepared from a copy of your original paperwork, or from the width and length of the building plus a few photographs.

  1. Find your paperwork if you have it. Original order paperwork, a handbook or an old invoice usually names the make and model and the exact size. That is the fastest route to an accurate price.
  2. If you have not, measure the building. Width and length, taken outside along the base, to the nearest few centimetres is plenty.
  3. Send photographs. One of each elevation from far enough back to see the whole building, one along the roof line from the ground, and one close-up of the eaves or ridge if you can get it safely from ground level.
  4. Tell us the access. Whether a vehicle can get near the garage, and whether anything overhangs it.
  5. We send the price in writing. One figure, with the specification alongside it, so you can compare it with anything else you hold.

Do not climb onto the roof to take photographs. If the covering is a corrugated cement type of an age that may contain asbestos, do not brush, drill, cut or pressure-wash it either — see our guide to spotting asbestos on UK garage roofs.

The Price Match Promise, and what to compare

If you have a written quotation from a comparable specialist for comparable work, tell us, and we will do our best to match it.

The two words doing the work there are written and comparable. A verbal figure cannot be matched because nobody can tell what it contains, and a cheaper quotation for a thinner, shorter-lived specification is not the same purchase. Do check what is actually being compared:

  • whether the roof is box-profile steel with anti-drip lining and a plastisol finish;
  • whether the ridge and eaves are properly capped and filled;
  • whether the old material is taken away and disposed of legally;
  • and whether there is a warranty at the end of it. Ours carries a five-year warranty on a system with a typical life of up to 40 years.

From 35 years in the trade: when a quotation is a long way below everyone else, the gap is almost never labour. It is usually the old roof staying on your drive, no anti-drip lining, or a lighter gauge sheet. Our article on the true cost of cheap garage roofs sets out where the money is taken out.

Comparing two quotations line by line

Use this as a checklist against any quotation you hold, including ours.

What to checkAsk for it in writingWhy it changes the price
Sheet profile and gauge“Box profile, what gauge?”Lighter gauge costs less and flexes more — see the benefits of 0.7mm roofing
Anti-drip lining“Is anti-drip lining included?”Without it, condensation drips onto everything below
Finish“Plastisol, and which colour?”Finish quality drives how the roof looks and lasts
Fixing centres“Fixed at close centres?”Fewer fixings is cheaper and less rigid
Ridge and eaves“Capped and filled?”Open edges let wind and rain in from day one
Old roof“Taken away, or left on site?”Removal and disposal is a real cost someone pays
Disposal paperwork“Will I receive documentation?”Hazardous waste has legal paperwork attached to it
Warranty“How long, and on what?”A warranty on the sheet only is not a warranty on the job
Who fits it“Employed, approved, or subcontracted on the day?”Experience on this building type is the whole job
Price certainty“Is this fixed, or subject to survey?”“Subject to survey” is where extras appear

If you are weighing up whether a new roof is even the right purchase, new roof vs new garage and how long a replacement garage roof lasts cover that decision, and garage roof replacement timing covers when to do it.

Responsible disposal is included, not extra

Asbestos-type material is handled by contractors trained in asbestos awareness Categories A and B and taken to a licensed disposal depot in line with Environment Agency and hazardous waste requirements. You receive the correct paperwork. We recycle what can be recycled.

That is not a courtesy, it is the law. Work with asbestos in Great Britain is governed by the Control of Asbestos Regulations 2012, with practical guidance in the HSE’s asbestos essentials task sheets. Asbestos waste is hazardous waste: it must go to a site permitted to take it, it travels under a consignment note, and anyone carrying it away as a business must be a registered waste carrier — a register you can search yourself on the Environment Agency public register.

Fly-tipped garage roofs are common, and the liability for waste does not simply vanish when somebody drives off with it. Keeping your consignment note is the proof that yours was dealt with properly. See understanding asbestos garage roof removal for how the removal itself works.

From 35 years in the trade: keep the disposal paperwork with your house papers. When you sell, the buyer’s solicitor asks about the garage roof, and a dated consignment note answers it in one line.

One visit, usually one day

Most roofs are stripped and replaced in a single day by time-served approved contractors. One visit, one crew, one price.

A single-day job matters more than it sounds: the building is never left open overnight, you are not taking two days off work, and there is no partly-finished roof waiting on a return visit when the weather turns. If your building also needs doors, fascias, gutters or a general tidy-up, those are far cheaper done while the crew and the access are already there — see garage revamps. If the building is genuinely finished, we also handle garage removal and supply new garages.

Who you are dealing with

We are family-owned and managed; our owner has 35 years’ experience of concrete garages, and we work nationwide from our Chesterfield yard. The yard is a working compound and is not open to the public — all quoting is done by phone, email and photograph.

Alongside roofing we remanufacture and stock obsolete spares for buildings nobody supports any more — locks, springs, cables, pulley wheels, clips, washers, eaves filler and gutter support kits are all in the spares shop. If you want to see the standard of finished work first, the gallery is the place to start, and why pay more for your concrete garage explains our thinking on specification.

To get a price: contact us, or send your building’s width and length with a few photographs.

FAQs

Is the price you quote really the price I pay?

Yes. You get one price, in writing, before anything is booked, covering the roof, the fitting, the removal of the old material and the disposal paperwork. There are no day-rate surprises and no extras invented halfway through the job.

Do you need to visit before you can quote?

Usually not. Most quotations are prepared from a copy of your original paperwork, or from the width and length of the building plus a few photographs sent by WhatsApp. That is also why there is no salesperson sitting in your kitchen.

How does the Price Match Promise work?

If you have a written quotation from a comparable specialist for comparable work, tell us and we will do our best to match it. It has to be written, and it has to be for genuinely comparable work — same sheet specification, same edge detail, old material removed and disposed of, and a warranty at the end of it.

What should I compare between garage roof quotations?

Whether the roof is box-profile steel with anti-drip lining and a plastisol finish, whether the ridge and eaves are properly capped and filled, whether the old material is taken away and disposed of legally, and whether there is a warranty. A quotation that is far cheaper is usually cheaper for one of those reasons.

Is removing and disposing of the old roof included?

Yes. Removal of the old material and the disposal paperwork are both inside the fixed price. Asbestos-type material is handled by contractors trained in asbestos awareness Categories A and B and taken to a licensed disposal depot in line with Environment Agency and hazardous waste requirements, and we recycle what can be recycled.

What paperwork do I get for asbestos-type waste?

You receive the correct documentation for the material taken away. Hazardous waste travels under a consignment note, and anyone removing it as a business must be a registered waste carrier — a register you can search on the Environment Agency public register. Keep your paperwork with your house papers for when you sell.

How long does a garage roof replacement take?

Most roofs are stripped and replaced in a single day by time-served approved contractors, so it is normally one visit rather than a return trip.

What warranty comes with the roof?

A five-year warranty, on a system with a typical life of up to 40 years.

Can I visit your yard?

No — the Chesterfield yard is a working compound and is not open to the public. All quoting is done by phone, email and photograph.

Do you do insurance work?

Yes, insurance work is undertaken. Call freephone 0800 318359 between 10 am and 4 pm, or contact us with the details.


ComptonRoofs.com — Freephone 0800 318359, 10 am to 4 pm. Insurance work undertaken.

Posted on Leave a comment

Looking After Your Concrete Garage: A Maintenance Guide from Concrete Garage Specialists

Image discussing how to maintain your garage every year.

Written by the Compton Roofs team — a family-owned and managed concrete garage specialist. Our owner has 35 years’ hands-on experience of concrete garages, and our site work is carried out by time-served approved contractors who do this work all week, every week. Last updated: 11 September 2026

TL;DR: Concrete garages ask very little of their owners, which is exactly why they get forgotten about. A few minutes of attention a couple of times a year will add years to the building and will keep any structural guarantee intact. Clear the gutter and check the outlet is running; look along the ridge and eaves from the ground; paint exposed steel before rust takes hold; re-treat exposed timber annually; keep door gear lubricated and running true; let a floor dry properly before painting or lining, using dry heat rather than gas; and fit eaves and foam filler while a roof is being replaced rather than afterwards. If your roof is a corrugated cement type of an age that may contain asbestos, do not brush, drill, cut or pressure-wash it — leave it alone and call us.

Contents

  1. Why does a concrete garage need any maintenance at all?
  2. Gutters and downpipes — the ten-minute job that saves the building
  3. Roof and ridge — what to look for from the ground
  4. What if my roof might contain asbestos?
  5. Steelwork — trusses, spars and fixings
  6. Timber — fascias and door frames
  7. Doors, springs and locks
  8. Drying out before you paint a floor or line the walls
  9. Draughts, eaves and foam filler
  10. Your twice-a-year checklist
  11. Repair or replacement? Send us photographs
  12. FAQs

Why does a concrete garage need any maintenance at all?

Because it asks so little. A concrete sectional garage has no annual service, nothing that beeps at you and no obvious warning that anything is wrong until water is already inside. That is exactly why they get forgotten about, and why the faults we are called out to are almost always small faults that were left for several years.

A few minutes of attention a couple of times a year — spring and autumn is the natural rhythm — will add years to the building. It will also keep any structural guarantee intact: guarantees on buildings and on roof systems, ours included, assume the building has been kept clear of standing water and that exposed steel and timber have been maintained.

From 35 years in the trade: almost every “the garage is past it” call we take turns out to be a blocked gutter that has been overflowing down the same panel for five winters, plus a roof covering at the end of its life. Neither of those is the concrete. Look after the water and the concrete will outlive all of us.

Gutters and downpipes — the ten-minute job that saves the building

Clear leaves and moss from the gutter and check that the outlet is running. Pour a bucket of water in at the far end and watch it leave; if it pools, the bracket line or the outlet is the problem, not the volume of rain.

Standing water is the single most common cause of stained panels, rotten fascias and damp inside. It is also the fault that costs least to put right and most to ignore.

CheckWhat you are looking forIf it is wrong
Gutter runLeaves, moss, silt, nesting materialClear by hand, flush with water
Outlet and downpipeWater leaving freely at the bottomRod or clear the outlet; check the shoe at the base
Gutter brackets and supportsSagging sections, water sitting mid-runRe-support the run — gutter support kits are stocked
Fascia behind the gutterStaining, softness, swellingRe-treat now, replace if the timber has gone
Panel below an overflowGreen staining, damp patch insideFix the overflow first, then let the panel dry

Roof and ridge — what to look for from the ground

Look along the ridge and eaves from the ground. You are looking for missing filler, lifted flashing or a loose fixing — any of which lets wind and rain in, and gets worse quickly, because once wind can get under a sheet line it works at it every gale.

You do not need to get on the roof to do this, and on a garage you should not. Stand at each corner and sight along the ridge line and the eaves line: both should be straight and continuous, with no daylight, no gaps where filler has perished, and no fixings standing proud. A pair of binoculars from the ground beats a ladder every time.

If you find water inside but the roof looks sound, consider condensation before you assume a leak — a cold uninsulated sheet drips onto everything below it, which is what anti-drip lining exists to prevent. Our guides to how long roofing felt lasts, corrugated garage roof sheets and why patching a leaking flat garage roof will not fix it explain what each older covering does at the end of its life.

From our fitters: a missing 300mm of ridge filler is a five-minute job on the day we are on a roof and a rotten fascia, a stained panel and a soaked floor two years later. If you can see a gap from the ground, it is already letting weather in.

What if my roof might contain asbestos?

If your roof is a corrugated cement type of the age that may contain asbestos, do not brush, drill, cut or pressure-wash it. Leave it alone and call us.

Asbestos cement is generally low risk while it is intact and left undisturbed; the risk comes from releasing fibres, and abrading, cutting or jet-washing the sheet does exactly that. Work with asbestos in the UK is governed by the Control of Asbestos Regulations 2012, with practical guidance in the HSE’s asbestos essentials task sheets, and the waste itself is hazardous waste with GOV.UK disposal rules attached to it. That is why “I’ll just give it a clean” is the one piece of garage maintenance we ask you not to do.

Start with our guide to spotting asbestos on UK garage roofs, and see understanding asbestos garage roof removal for how removal actually works. Our contractors are trained in asbestos awareness, Categories A and B; material is removed to a licensed disposal depot in accordance with Environment Agency and hazardous waste requirements, we recycle wherever possible, and full disposal paperwork is provided.

From 35 years in the trade: keep that disposal paperwork with your house papers. When you come to sell, the buyer’s solicitor asks about the garage roof, and a dated consignment note answers it in one line.

Steelwork — trusses, spars and fixings

Roof trusses and steelwork are supplied primed. Primer is a protective base coat, not a finish coat, and it is not intended to be the building’s permanent weather protection.

Once the building is a few years old, exposed steel benefits from a coat of a suitable metal paint before any surface rust takes hold. The order matters: paint clean, sound primed steel and you are simply topping it up; wait until it is scaling and you are into wire-brushing, rust treatment and, in the worst cases, replacing spars and brackets. Spar shelving brackets, eyebolts, roofing bolts, clips and washers are all stocked in our spares shop if something is beyond painting.

Timber — fascias and door frames

Any exposed timber should be re-treated annually with a suitable preservative, particularly fascias and door frames. Those are the two places where timber sits closest to running water and takes the most weather.

Do it in dry weather on dry timber, and pay particular attention to end grain and to the top edge of a fascia, which is where water sits and where rot starts. New fascias fitted at the same time as a roof replacement are far cheaper than fascias fitted as their own job — see garage revamps.

Doors, springs and locks

Up-and-over and personnel doors are galvanised steel with a powder-coated primed finish. Keep the mechanism, springs and lock lightly lubricated, and keep the door running true.

A door that has started to bind will usually be a cheap fix now and an expensive one later. Binding puts load through the springs, wires and pulley wheels, and those parts fail in that order.

PartTwice-a-year attentionWarning sign
SpringsLight lubricationUneven lift, door rising crooked
Wires and cablesVisual check for frayingStrands lifting, slack on one side
Pulley wheels and bracketsLight lubrication, check tightnessGrating, wheel not turning freely
Lock and handleLight lubrication of barrel and camKey stiff, cam not throwing fully
Frame and running gearCheck the door closes squareDoor binds or rubs on one side
FinishWash down, touch in chipsRust spots on the powder-coated surface

Doors, locks, cams, springs, cables, pulley wheel assemblies and brackets — including parts for obsolete Compton buildings that nobody makes any more — are stocked in our spares shop. If the door is beyond parts, a replacement steel up-and-over door is the single most common upgrade we fit.

Drying out before you paint a floor or line the walls

If you are painting the floor or lining the walls, allow plenty of time for the concrete to dry first. Floor paint and linings applied over damp concrete fail — the paint lifts, and a lining traps moisture against the wall.

Use a dry heat source, such as an electric heater, rather than a gas heater, which puts moisture back into the air as it burns. That is the point most people get wrong: burning gas produces water vapour, so a bottled gas heater in a closed garage is adding to the problem you are trying to solve. It also produces combustion gases in an enclosed space — see the NHS guidance on carbon monoxide poisoning — so ventilation matters as much as the drying does.

Ventilate as well as heat: a closed, heated garage simply holds the moisture. Leave a door or window open enough to let damp air out.

Draughts, eaves and foam filler

Eaves and foam filler make a surprising difference. They close the profile of the sheet at the ridge and the eaves, which stops wind driving under the roof line and taking rain, leaves and birds with it.

It is far easier to fit as part of a roof replacement than afterwards, because the fitter is already at the sheet line with the sheets open. Retro-fitting means going back up to a finished roof and working blind along an edge. If you are having a roof replaced, confirm before the job that eaves filler is included; it is one of the details that quietly disappears from a cheap quote, along with fixing centres — see the true cost of cheap garage roofs and why sheet gauge matters. Big6, B5 profile and similar foam fillers are stocked.

Your twice-a-year checklist

ItemFrequencyDo this
Gutter and outletTwice a year, and after autumn leaf fallClear debris, flush, check water leaves the downpipe
Ridge and eavesTwice a year, from the groundSight along both lines for gaps, lifted flashing, loose fixings
Exposed steelworkFrom a few years old, then as neededCoat with a suitable metal paint before rust takes hold
Exposed timberAnnuallyRe-treat with a suitable preservative, fascias and door frames first
Door mechanism, springs, lockTwice a yearLight lubrication; make sure the door runs true
Floor and lining workBefore painting or liningDry the concrete with dry heat and ventilation, not gas
Suspected asbestos cement roofNever disturbDo not brush, drill, cut or pressure-wash — call us

Nothing on that list needs a roof ladder, scaffolding or a specialist. If a job does, that is the point to ring us rather than to improvise. There is more background in our buyer’s guide to concrete sectional garages and workshops, what governs replacement roof lifespan and seven dangers in old garages.

Repair or replacement? Send us photographs

If something needs putting right, send us a few photographs by WhatsApp, and we will tell you honestly whether it is a repair or a replacement. We would rather sell you a bag of clips than a roof you do not need.

  1. Photograph each elevation of the garage from far enough back to see the whole building.
  2. Photograph the roof line — ridge and eaves — from the ground at each corner.
  3. Photograph the doors, inside and out, and anything specific you are worried about.
  4. Send them by WhatsApp to 07902 465165, with the building’s width and length, or a copy of your original paperwork if you still have it.

We supply and fit; our contractors are time-served and approved, and the price we quote is the price you pay. If the answer is a new roof, what a re-roof day involves and why a new roof beats a new garage set out what happens next; if the building genuinely is beyond saving we will say so, and we cover garage removal and new garages too.

ComptonRoofs.com — Freephone 0800 318359, 10am to 4pm. WhatsApp photos to 07902 465165. Or use the contact page.

FAQs

How often should I maintain a concrete garage?

A few minutes twice a year is enough for most of it: gutters and outlet, a sight along the ridge and eaves from the ground, and light lubrication of the door gear. Exposed timber needs re-treating annually, and exposed steelwork needs a coat of suitable metal paint once the building is a few years old.

Why do blocked gutters matter so much on a concrete garage?

Standing water is the single most common cause of stained panels, rotten fascias and damp inside. Clear the leaves and moss and check the outlet is actually running — if water pools in the run, the supports or the outlet need attention rather than the gutter being emptied again.

Can I pressure-wash my garage roof?

Not if it is a corrugated cement roof of an age that may contain asbestos. Do not brush, drill, cut or pressure-wash it — leave it alone and call us. Work with asbestos is governed by the Control of Asbestos Regulations 2012, and abrading or jet-washing the sheet is what releases fibres from otherwise intact material.

My garage roof trusses are going rusty — what should I paint them with?

Roof trusses and steelwork are supplied primed, and primer is a base coat rather than a finish. Once the building is a few years old, give exposed steel a coat of a suitable metal paint before any surface rust takes hold; that is far less work than treating scaled rust later.

How often should garage fascias and door frames be treated?

Annually, with a suitable preservative, in dry weather on dry timber. Fascias and door frames sit closest to running water and take the most weather, and the top edge and end grain are where rot starts.

My up-and-over door has started to bind — is that urgent?

It is worth dealing with promptly. Keep the mechanism, springs and lock lightly lubricated and the door running true; a door that has started to bind will usually be a cheap fix now and an expensive one later, because binding loads the springs, cables and pulley wheels until they fail.

How long should I let a garage floor dry before painting it?

Allow plenty of time — paint and wall linings applied over damp concrete fail. Use a dry heat source such as an electric heater rather than a gas heater, which puts moisture back into the air as it burns, and ventilate while you heat so the damp air can leave.

Is eaves and foam filler worth fitting to an existing roof?

It makes a surprising difference to draughts and to wind-driven rain, but it is far easier and cheaper to fit as part of a roof replacement than afterwards. If you are having a roof replaced, check that eaves filler is included in the quote.

Will maintenance affect my garage guarantee?

Yes — keeping the building clear of standing water and maintaining exposed steel and timber is what keeps a structural guarantee intact. Routine care of that kind is expected of the owner under most building and roof-system guarantees, ours included.

How do I find out whether I need a repair or a replacement?

Send us a few photographs by WhatsApp on 07902 465165 — each elevation, the roof line from the ground and the doors — with the building’s width and length. We will tell you honestly which it is. We supply and fit, our contractors are time-served and approved, and the price we quote is the price you pay.

Posted on Leave a comment

Why a New Roof Beats a New Garage: When to Re-Roof a Concrete Sectional Garage and When to Replace It

An old garage roof vs a new one. Why it will need replacing.

Written by the Compton Roofs team — a family-owned and managed concrete garage specialist. Our owner has 35 years’ hands-on experience of concrete garages, and our site work is carried out by time-served approved contractors who do this work all week, every week. Last updated: 1 September 2026

TL;DR: On most concrete sectional garages the concrete is still square, solid and doing its job — it is the roof that has given up. A replacement roof is a single-skin box-profile steel system, fixed at close centres, with anti-drip lining bonded to the underside and a plastisol finish in your choice of colours, with ridge and eaves properly capped and filled. Typical life is up to 40 years with a five-year warranty, and most jobs are done in a day. Replacing the whole building means demolition, disposal, a new base and starting again — for most owners the roof is the whole problem, so a new roof is the whole answer. Everything is supply and fit, prices are fixed before we start, and we are happy to work with your insurer.

Contents

  1. Are old concrete sectional garages worth keeping?
  2. Why is it always the roof that fails first?
  3. What exactly is a replacement Compton Roofs roof?
  4. Roof replacement or whole new garage — how do the two compare?
  5. When is a garage genuinely beyond saving?
  6. What else is worth doing while we are on site?
  7. Do you cover battery garages and blocks?
  8. How does supply and fit work, and are prices fixed?
  9. Can this go through an insurance claim?
  10. FAQs

Are old concrete sectional garages worth keeping?

Usually, yes. Concrete sectional garages were built to last, and most of them have. Walk down almost any street of 1960s- to 1990s-era housing and the concrete is still square, still solid, and still doing its job. What has usually given up is the roof.

That is good news, because the roof is the part we can replace in a day.

From 35 years in the trade: the buildings that get condemned are rarely the ones that deserve it. When someone tells us their garage is “past it”, nine times in ten they are describing a failed roof, water staining down the inside of sound panels, and rusted door gear — three replaceable items bolted to a structure that has decades left. Before you accept a demolition quote, get someone to tell you specifically what is wrong with the concrete.

Why is it always the roof that fails first?

Because the roof is the only part of the building taking direct weather, standing water and thermal movement year after year, and on garages of this age it is usually the original felt, corrugated sheeting or asbestos-cement covering. Concrete panels sit vertically and shed water; a roof holds it.

Two failures follow from that. Water gets in through splits, failed laps and perished fixings — and once it is in, patching chases it around rather than stopping it, which is exactly why patching a leaking flat garage roof doesn’t fix it. And condensation forms on the underside of a cold, uninsulated sheet and drips onto everything below, which owners very often mistake for a leak. Our guides to maintaining your concrete garage and how long roofing felt lasts cover the life expectancy of the older coverings.

If your existing roof is asbestos cement — common on garages of this era — do not break, drill or pressure-wash it. Start with our guide to spotting asbestos on UK garage roofs. Work with asbestos is governed by the Control of Asbestos Regulations 2012, with HSE guidance in its asbestos essentials series; we remove that material to a licensed disposal depot and provide full paperwork.

What exactly is a replacement Compton Roofs roof?

A replacement Compton Roofs roof is a single-skin box-profile steel system, fixed at close centres so it sits tight and rigid across the span, with anti-drip lining bonded to the underside to deal with condensation and a plastisol finish in your choice of colours. Ridge and eaves are properly capped and filled, so the wind stops blowing under the roof line.

ElementWhat we fitWhy it matters
SheetSingle-skin box-profile steelSpans the building and stiffens the structure; sheds water fast
Fixing centresFixed at close centresSits tight and rigid across the span — no drumming or working loose
LiningAnti-drip lining bonded to the undersideAbsorbs and releases condensation instead of dripping on your car
FinishPlastisol, your choice of coloursLow-maintenance coated finish, no annual re-coating
Ridge and eavesProperly capped and filledStops wind driving under the roof line and lifting sheets
Typical lifeUp to 40 yearsWhole-life cost, not just today’s price
WarrantyFive yearsWritten cover on the installation
Time on siteUsually a single dayOne day’s disruption, garage back in use

From our fitters: the two details that separate a roof that lasts from one that annoys you are the fixing centres and the eaves filler. Sheets fixed at generous centres flex in the wind, drum in rain and eventually work their fixings; unfilled eaves let wind, driven rain, leaves and birds straight under the sheet line. Both are invisible on a quote and obvious within a winter. Ask any contractor what centres they fix at and whether eaves filler is included. Our note on 0.7mm garage roofing explains why sheet gauge is worth asking about too, and replacement garage roof lifespan sets out what governs the 40-year figure.

Roof replacement or whole new garage — how do the two compare?

Compare a new roof with the cost and disruption of demolishing a perfectly sound building, disposing of the material, laying a new base and starting again. For most owners, the roof is the whole problem, and a new roof is the whole answer.

Replacement roofFull replacement building
Work involvedStrip old covering, fit new system to existing structureDemolition, disposal of material, new base, new building erected
Existing sound concreteKept and usedBroken up and thrown away
Time on siteUsually one daySeveral visits, plus curing time for a new base
Waste and disposalThe old roof covering onlyThe entire building
Right whenConcrete panels are sound and squareStructure or base has genuinely failed
Read moreReplacement roof lifespan · What a re-roof day looks likeNew garages · Foundations and replacement

The cheapest-looking option is a third one we would steer you away from: another patch, or a thin budget covering that needs doing again in a few years. We set out the arithmetic in the true cost of cheap garage roofs.

When is a garage genuinely beyond saving?

Sometimes it is, and we will tell you when that is the case. Where a garage genuinely is beyond saving, we demolish it and can supply a replacement building instead — see garage removal and new garages.

The honest indicators are structural rather than cosmetic: a base that has broken up, sunk or is no longer level; panels that are cracked through, badly spalled or have lost their reinforcement rather than simply stained; a building visibly out of square or leaning; or a footprint that no longer suits you, because a modern car will not fit a garage designed for a 1965 saloon. What we cover in garage foundations and replacement and the buyer’s guide to concrete sectional garages and workshops is the right reading before you commit either way. Note also that replacing a like-for-like outbuilding is usually simpler than changing its size or position — check the current rules on GOV.UK’s planning permission guidance before you change the footprint.

What else is worth doing while we are on site?

While we are there, other things are easy to put right. Replacement steel up-and-over doors, new fascias, replacement windows, panel repairs and battery garage revamps all transform how a building looks and how secure it is.

ImprovementWhat it changes
Replacement steel up-and-over doorSecurity and daily usability — the most common single upgrade
New fasciasTidies the roof line and finishes the new roof properly
Replacement windowsLight, weather-tightness and appearance
Panel repairsDeals with impact damage and cracked sections
Battery garage revampsBrings a whole block back to a consistent, maintained condition

Doors, locks, springs, wires, wheels, roofing bolts, guttering and lining clips are all stocked in our spares shop, and the results of full makeovers are on our garage revamps and gallery pages. Doing them on the same visit avoids a second set-up, a second scaffold or tower, and a second day of disruption.

Do you cover battery garages and blocks?

Yes. Battery garages — the terraced blocks behind older housing, often owned by a landlord, council or management company — are re-roofed and revamped in the same way, with the advantage that doing a whole run at once brings the per-garage cost of setting up down and leaves the block looking consistent rather than patched.

How does supply and fit work, and are prices fixed?

Everything we do is supply and fit. Site work is carried out by time-served approved contractors who do this work all week, every week, and our prices are fixed before we start.

That means the figure you accept is the figure you pay, not a day rate that grows on site. To quote you accurately we need either a copy of your original paperwork or the building’s width and length, plus a few photographs of each elevation, the roof and the doors. WhatsApp on 07902 465165 is the quickest way to send them, or call Freephone 0800 318359, 10am to 4pm. There is more on what a fitting day involves in our roof replacement timing guide, and you can reach us any time through the contact page.

Can this go through an insurance claim?

We are also happy to work with your insurer. Storm damage, impact damage and similar events are the usual routes, and having a fixed, itemised quotation from a specialist contractor — with photographs of the failure — is what an insurer needs in order to assess it. Send us the photographs first and we will quote in a form you can pass straight on.

From 35 years in the trade: photograph the damage before anything is moved or made safe, and photograph the whole roof, not just the hole. Claims stall far more often on missing evidence than on disputed cost.

FAQs

Is it cheaper to re-roof a concrete garage or replace the whole thing?

For most owners re-roofing is the sensible route, because the concrete panels are usually still sound and the roof is the only failed component. Replacing the building means demolition, disposing of the material, laying a new base and erecting a new garage — far more cost and disruption for a structure that is doing its job.

How long does a replacement garage roof take to fit?

Most jobs are completed in a single day, so the garage is back in use quickly.

How long does a new garage roof last?

The system we fit has a typical life of up to 40 years and carries a five-year warranty. It is a single-skin box-profile steel roof with a plastisol finish, which needs no annual re-coating.

What stops condensation dripping off a steel garage roof?

An anti-drip lining bonded to the underside of the sheet. It absorbs condensation as it forms and releases it as the air warms, instead of letting it drip onto the car and anything stored below.

Why do fixing centres and eaves detailing matter?

Sheets fixed at close centres sit tight and rigid across the span rather than flexing, drumming and working their fixings loose. Properly capped and filled ridge and eaves stop wind blowing under the roof line and lifting the sheets. Both are easy to leave out of a cheap quote and obvious within a winter.

What else can you replace at the same time as the roof?

Replacement steel up-and-over doors, new fascias, replacement windows, panel repairs and full battery garage revamps. Doing them on the same visit avoids a second set-up and a second day of disruption.

Are your quoted prices fixed?

Yes. Everything is supply and fit, and prices are fixed before we start. Site work is carried out by time-served approved contractors who do this work all week, every week.

Will you work with my insurance company?

Yes, we are happy to work with your insurer. Photograph the damage before anything is moved, send us the photographs, and we will provide a fixed, itemised quotation you can pass to them.

What if my garage really is beyond repair?

Then we will say so. Where a garage genuinely is beyond saving we demolish it and can supply a replacement building instead. The indicators are structural — a broken or sunken base, panels cracked through rather than stained, or a building out of square.

Posted on Leave a comment

Whatever Happened to Compton Buildings of Fenny Compton? And Who Repairs a Compton Garage Now?

The Compton Buildings team celebrating 50 years.

Written by the Compton Roofs team — a family-owned and managed concrete garage specialist. Our owner has 35 years’ hands-on experience of concrete garages: Compton Buildings, LidgetCompton, Hanson and the rest. Last updated: 1 September 2026

TL;DR: Compton Buildings of Fenny Compton was founded in 1958 by Cyril Kyme, celebrated its fiftieth birthday in November 2008 under new ownership, and stopped production at Fenny Compton in the summer of 2011. By 2009 the company claimed to have supplied over 500,000 concrete garages, sheds and workshops. Those buildings are still standing, but the original factory, parts and roof sheets are not made any more. We supply replacement garage roofs, repairs, improvements, demolition and hard-to-find Compton components nationwide, fitted by time-served approved contractors. To quote you we need your original paperwork, or the building’s width and length plus a few photographs — WhatsApp is quickest.

Contents

  1. What happened to Compton Buildings of Fenny Compton?
  2. What did the Compton Group actually include?
  3. Is the “Compton” garage sold today the same company?
  4. Why does any of this matter to a garage owner?
  5. Who repairs and re-roofs Compton garages now?
  6. What does a replacement garage roof involve?
  7. What happens with an asbestos-type garage roof?
  8. Can you demolish or replace the whole garage?
  9. Can you still get obsolete Compton parts?
  10. How do you get a quotation?
  11. FAQs

What happened to Compton Buildings of Fenny Compton?

November 2008 saw jubilation at Compton Buildings. It was the company’s fiftieth birthday, there were new owners, and the future looked secure.

Founded in 1958 by Cyril Kyme, Compton had gradually absorbed brands such as Banbury and Washington Garages, while rivals like Grimston and Marley Garages had long since fallen by the wayside. By 2009, a confident Compton was claiming to have built more concrete garages, sheds and workshops than anyone else, with over 500,000 buildings supplied.

Behind the scenes, the picture was different. The experienced management team was dispensed with, the workforce and dealer network were alienated, and in the summer of 2011 the factory at Fenny Compton ceased production.

DateWhat happened
1958Compton Buildings founded at Fenny Compton, Warwickshire, by Cyril Kyme
1960s–1990sAbsorbs brands including Banbury and Washington Garages; rivals such as Grimston and Marley Garages leave the market
November 2008Fiftieth anniversary marked under new ownership
2009Company claims more than 500,000 buildings supplied — garages, sheds and workshops
2009–2011Experienced management team dispensed with; workforce and dealer network alienated
Summer 2011Production at the Fenny Compton factory ceases
LaterThe Compton name reappears on a rival concrete manufacturer’s branding — a different product

What did the Compton Group actually include?

At its height the Compton Group was more than the garage business. It included Compton Buildings (the concrete sectional garages, sheds and workshops most people remember), Compton Commercial, and the greenhouse brands Alton and Robinsons.

That breadth is part of why so many Compton buildings are still in gardens and driveways across the UK: the group sold through a wide dealer network for over five decades before production stopped.

Is the “Compton” garage sold today the same company?

No. The Compton name later reappeared when a rival concrete manufacturer adopted the branding style, but that product should not be confused with the original Compton Buildings of Fenny Compton.

From 35 years in the trade: this trips people up weekly. Owners ring a company whose name looks familiar, assume it holds the original moulds, panel profiles and roof sheet sizes, and are told nothing fits. The panels, door gear and roof profiles of an original Compton building were specific to that factory — which is exactly why obsolete Compton parts have to be sourced, not ordered from a current catalogue.

Why does any of this matter to a garage owner?

Because the closure leaves several hundred thousand Compton garages still standing, and their owners still needing parts and roofs that nobody makes any more.

A concrete sectional garage is a long-lived structure. The concrete panels routinely outlast everything bolted to them — the roof sheets, the lining, the door springs, the locks. When the roof reaches the end of its life on a building whose manufacturer no longer exists, the owner has three real options: patch it, re-roof it with a modern system sized to the existing frame, or replace the building. We cover the first of those in why patching a leaking flat garage roof doesn’t fix it and the economics of the cheap option in the true cost of cheap garage roofs.

Who repairs and re-roofs Compton garages now?

We do. We are a family-owned and managed specialist, and our owner has 35 years’ experience of concrete garages — Compton Buildings, LidgetCompton, Hanson and the rest. That long-standing, first-hand knowledge of how these specific buildings were made is what lets us identify a building from a photograph and quote a roof that actually fits it.

Our work includes replacement garage roofs, garage repairs and garage improvements, fitted nationwide by time-served, approved contractors.

ServiceWhat it coversWhere to read more
Replacement garage roofsSingle-skin box-profile steel roof system, sized to the existing buildingReplacement garage roof lifespan
Garage repairs and improvementsDoors, locks, springs, guttering, lining, panel repairs, revampsGarage revamps
Asbestos-type roof removalRemoval to a licensed disposal depot with full paperworkSpotting asbestos on UK garage roofs
Demolition and removalFull garage demolition and site clearanceGarage removal
Replacement buildingsA new garage supplied in place of the old oneNew garages
Obsolete Compton partsPanels, doors, locks, springs, roof supportsSpares shop

What does a replacement garage roof involve?

A full roof replacement is normally a single-skin box-profile steel system with anti-drip lining, a plastisol finish and a choice of colours, fixed at close centres for rigidity. It is a clean, low-maintenance finish, and most jobs are completed in a single day.

ElementSpecification
Sheet typeSingle-skin box profile steel
LiningAnti-drip (anti-condensation) lining
FinishPlastisol, choice of colours
FixingsFixed at close centres for rigidity
Typical lifeUp to 40 years
WarrantyFive years
Time on siteUsually a single day
MaintenanceLow — no annual re-coating like felt

From our fitters: the close fixing centres matter more than the colour. On a sectional concrete building the roof sheets are doing structural work as well as keeping water out, and a sheet fixed at generous centres will drum, flex and eventually work its fixings loose. If you are comparing quotes, ask what the fixing centres are and what gauge the sheet is — our note on 0.7mm garage roofing explains why the gauge is worth asking about.

What happens with an asbestos-type garage roof?

Many garages of this era were roofed in asbestos cement sheeting, and we handle those roofs too. Our contractors are trained in asbestos awareness, Categories A and B. Material is removed to a licensed disposal depot in accordance with Environment Agency and hazardous waste requirements, and we recycle wherever possible. Full disposal paperwork is provided.

For context on the rules themselves rather than our own process: work with asbestos in the UK is governed by the Control of Asbestos Regulations 2012, HSE publishes guidance and task sheets for lower-risk asbestos work in its asbestos essentials series and sets out its training requirements for anyone likely to disturb asbestos, and disposal is a hazardous waste matter covered by GOV.UK’s hazardous waste guidance. If you are unsure whether your own roof contains asbestos, do not break, drill or pressure-wash it — start with our asbestos identification guide and ask us.

From 35 years in the trade: the paperwork is not a formality. Keep the disposal documentation with your house papers — it is the evidence that the material left your property through a licensed route, and it is the first thing a buyer’s solicitor asks about when a survey mentions asbestos.

Can you demolish or replace the whole garage?

Yes. We carry out garage demolition and can supply a replacement building. Where the concrete panels are sound, re-roofing is usually the sensible route; where the structure or the base has gone, replacement is. Our guides to garage foundations and replacement and buying a concrete sectional garage or workshop set out what to look at before deciding.

Can you still get obsolete Compton parts?

We hold stocks of components that are otherwise hard to find, including concrete panels, doors, locks, springs and roof supports for obsolete Compton buildings. These are used on our own fitted work.

PartCommonly needed for
Concrete panelsImpact damage, cracked or spalled sections
Up-and-over and side doorsSeized, rusted or unsafe original doors
Locks and handlesWorn or broken original door furniture
Springs, wires, wheels and eye boltsDoors that will not hold position or lift evenly
Roof supports and purlinsRe-roofing where original supports have corroded
Roofing bolts, washers, spacers, lining clips, gutteringAny roof replacement or repair

How do you get a quotation?

To quote you, we need either a copy of your original paperwork or the building’s width and length, plus a few photographs. WhatsApp is the quickest way to send them.

  1. Find the paperwork if you still have it — the original Compton order or invoice gives the exact size and model.
  2. Otherwise measure the building’s width and length.
  3. Take a few photographs — each elevation, the roof, and a close-up of the doors and any damage.
  4. Send them by WhatsApp on 07902 465165, or call Freephone 0800 318359, 10am to 4pm.

Consumer information: where to find products and services for Compton concrete garages following the closure of Compton Buildings.

ComptonRoofs.com — Freephone 0800 318359, 10am to 4pm. Photos by WhatsApp on 07902 465165. Or use our contact page.

FAQs

When did Compton Buildings of Fenny Compton close?

The factory at Fenny Compton ceased production in the summer of 2011, less than three years after the company’s fiftieth anniversary in November 2008. Compton Buildings was founded in 1958 by Cyril Kyme.

How many Compton garages were built?

By 2009 the company was claiming to have built more concrete garages, sheds and workshops than anyone else, with over 500,000 buildings supplied. Several hundred thousand of those buildings are still standing today.

Is the Compton garage sold today made by the original company?

No. The Compton name later reappeared when a rival concrete manufacturer adopted the branding style. That product should not be confused with the original Compton Buildings of Fenny Compton, and it does not follow the original panel, door and roof specifications.

Can I still get parts for a Compton concrete garage?

Yes. We hold stocks of components that are otherwise hard to find for obsolete Compton buildings, including concrete panels, doors, locks, springs and roof supports. These are used on our own fitted work.

What does a replacement garage roof consist of?

Normally a single-skin box-profile steel system with anti-drip lining and a plastisol finish in a choice of colours, fixed at close centres for rigidity. It is low maintenance, has a typical life of up to 40 years and carries a five-year warranty. Most jobs are completed in a single day.

Do you remove asbestos garage roofs?

Yes. Our contractors are trained in asbestos awareness, Categories A and B. Material is removed to a licensed disposal depot in accordance with Environment Agency and hazardous waste requirements, we recycle wherever possible, and full disposal paperwork is provided.

Do you cover the whole of the UK?

Yes. Replacement roofs, repairs and improvements are fitted nationwide by time-served, approved contractors.

What do you need in order to quote for my garage?

Either a copy of your original paperwork, or the building’s width and length plus a few photographs. WhatsApp on 07902 465165 is the quickest way to send them, or call Freephone 0800 318359 between 10am and 4pm.

TL;DR: Compton Buildings of Fenny Compton was founded in 1958 by Cyril Kyme, celebrated its fiftieth birthday in November 2008 under new ownership, and stopped production at Fenny Compton in the summer of 2011. By 2009 the company claimed to have supplied over 500,000 concrete garages, sheds and workshops. Those buildings are still standing, but the original factory, parts and roof sheets are not made any more. We supply replacement garage roofs, repairs, improvements, demolition and hard-to-find Compton components nationwide, fitted by time-served approved contractors. To quote you we need your original paperwork, or the building’s width and length plus a few photographs — WhatsApp is quickest.

Contents

  1. What happened to Compton Buildings of Fenny Compton?
  2. What did the Compton Group actually include?
  3. Is the “Compton” garage sold today the same company?
  4. Why does any of this matter to a garage owner?
  5. Who repairs and re-roofs Compton garages now?
  6. What does a replacement garage roof involve?
  7. What happens with an asbestos-type garage roof?
  8. Can you demolish or replace the whole garage?
  9. Can you still get obsolete Compton parts?
  10. How do you get a quotation?
  11. FAQs

What happened to Compton Buildings of Fenny Compton?

November 2008 saw jubilation at Compton Buildings. It was the company’s fiftieth birthday, there were new owners, and the future looked secure.

Founded in 1958 by Cyril Kyme, Compton had gradually absorbed brands such as Banbury and Washington Garages, while rivals like Grimston and Marley Garages had long since fallen by the wayside. By 2009, a confident Compton was claiming to have built more concrete garages, sheds and workshops than anyone else, with over 500,000 buildings supplied.

Behind the scenes, the picture was different. The experienced management team was dispensed with, the workforce and dealer network were alienated, and in the summer of 2011 the factory at Fenny Compton ceased production.

DateWhat happened
1958Compton Buildings founded at Fenny Compton, Warwickshire, by Cyril Kyme
1960s–1990sAbsorbs brands including Banbury and Washington Garages; rivals such as Grimston and Marley Garages leave the market
November 2008Fiftieth anniversary marked under new ownership
2009Company claims more than 500,000 buildings supplied — garages, sheds and workshops
2009–2011Experienced management team dispensed with; workforce and dealer network alienated
Summer 2011Production at the Fenny Compton factory ceases
LaterThe Compton name reappears on a rival concrete manufacturer’s branding — a different product

What did the Compton Group actually include?

At its height the Compton Group was more than the garage business. It included Compton Buildings (the concrete sectional garages, sheds and workshops most people remember), Compton Commercial, and the greenhouse brands Alton and Robinsons.

That breadth is part of why so many Compton buildings are still in gardens and driveways across the UK: the group sold through a wide dealer network for over five decades before production stopped.

Is the “Compton” garage sold today the same company?

No. The Compton name later reappeared when a rival concrete manufacturer adopted the branding style, but that product should not be confused with the original Compton Buildings of Fenny Compton.

From 35 years in the trade: this trips people up weekly. Owners ring a company whose name looks familiar, assume it holds the original moulds, panel profiles and roof sheet sizes, and are told nothing fits. The panels, door gear and roof profiles of an original Compton building were specific to that factory — which is exactly why obsolete Compton parts have to be sourced, not ordered from a current catalogue.

Why does any of this matter to a garage owner?

Because the closure leaves several hundred thousand Compton garages still standing, and their owners still needing parts and roofs that nobody makes any more.

A concrete sectional garage is a long-lived structure. The concrete panels routinely outlast everything bolted to them — the roof sheets, the lining, the door springs, the locks. When the roof reaches the end of its life on a building whose manufacturer no longer exists, the owner has three real options: patch it, re-roof it with a modern system sized to the existing frame, or replace the building. We cover the first of those in why patching a leaking flat garage roof doesn’t fix it and the economics of the cheap option in the true cost of cheap garage roofs.

Who repairs and re-roofs Compton garages now?

We do. We are a family-owned and managed specialist, and our owner has 35 years’ experience of concrete garages — Compton Buildings, LidgetCompton, Hanson and the rest. That long-standing, first-hand knowledge of how these specific buildings were made is what lets us identify a building from a photograph and quote a roof that actually fits it.

Our work includes replacement garage roofs, garage repairs and garage improvements, fitted nationwide by time-served, approved contractors.

ServiceWhat it coversWhere to read more
Replacement garage roofsSingle-skin box-profile steel roof system, sized to the existing buildingReplacement garage roof lifespan
Garage repairs and improvementsDoors, locks, springs, guttering, lining, panel repairs, revampsGarage revamps
Asbestos-type roof removalRemoval to a licensed disposal depot with full paperworkSpotting asbestos on UK garage roofs
Demolition and removalFull garage demolition and site clearanceGarage removal
Replacement buildingsA new garage supplied in place of the old oneNew garages
Obsolete Compton partsPanels, doors, locks, springs, roof supportsSpares shop

What does a replacement garage roof involve?

A full roof replacement is normally a single-skin box-profile steel system with anti-drip lining, a plastisol finish and a choice of colours, fixed at close centres for rigidity. It is a clean, low-maintenance finish, and most jobs are completed in a single day.

ElementSpecification
Sheet typeSingle-skin box profile steel
LiningAnti-drip (anti-condensation) lining
FinishPlastisol, choice of colours
FixingsFixed at close centres for rigidity
Typical lifeUp to 40 years
WarrantyFive years
Time on siteUsually a single day
MaintenanceLow — no annual re-coating like felt

From our fitters: the close fixing centres matter more than the colour. On a sectional concrete building the roof sheets are doing structural work as well as keeping water out, and a sheet fixed at generous centres will drum, flex and eventually work its fixings loose. If you are comparing quotes, ask what the fixing centres are and what gauge the sheet is — our note on 0.7mm garage roofing explains why the gauge is worth asking about.

What happens with an asbestos-type garage roof?

Many garages of this era were roofed in asbestos cement sheeting, and we handle those roofs too. Our contractors are trained in asbestos awareness, Categories A and B. Material is removed to a licensed disposal depot in accordance with Environment Agency and hazardous waste requirements, and we recycle wherever possible. Full disposal paperwork is provided.

For context on the rules themselves rather than our own process: work with asbestos in the UK is governed by the Control of Asbestos Regulations 2012, HSE publishes guidance and task sheets for lower-risk asbestos work in its asbestos essentials series and sets out its training requirements for anyone likely to disturb asbestos, and disposal is a hazardous waste matter covered by GOV.UK’s hazardous waste guidance. If you are unsure whether your own roof contains asbestos, do not break, drill or pressure-wash it — start with our asbestos identification guide and ask us.

From 35 years in the trade: the paperwork is not a formality. Keep the disposal documentation with your house papers — it is the evidence that the material left your property through a licensed route, and it is the first thing a buyer’s solicitor asks about when a survey mentions asbestos.

Can you demolish or replace the whole garage?

Yes. We carry out garage demolition and can supply a replacement building. Where the concrete panels are sound, re-roofing is usually the sensible route; where the structure or the base has gone, replacement is. Our guides to garage foundations and replacement and buying a concrete sectional garage or workshop set out what to look at before deciding.

Can you still get obsolete Compton parts?

We hold stocks of components that are otherwise hard to find, including concrete panels, doors, locks, springs and roof supports for obsolete Compton buildings. These are used on our own fitted work.

PartCommonly needed for
Concrete panelsImpact damage, cracked or spalled sections
Up-and-over and side doorsSeized, rusted or unsafe original doors
Locks and handlesWorn or broken original door furniture
Springs, wires, wheels and eye boltsDoors that will not hold position or lift evenly
Roof supports and purlinsRe-roofing where original supports have corroded
Roofing bolts, washers, spacers, lining clips, gutteringAny roof replacement or repair

How do you get a quotation?

To quote you, we need either a copy of your original paperwork or the building’s width and length, plus a few photographs. WhatsApp is the quickest way to send them.

  1. Find the paperwork if you still have it — the original Compton order or invoice gives the exact size and model.
  2. Otherwise measure the building’s width and length.
  3. Take a few photographs — each elevation, the roof, and a close-up of the doors and any damage.
  4. Send them by WhatsApp on 07902 465165, or call Freephone 0800 318359, 10am to 4pm.

Consumer information: where to find products and services for Compton concrete garages following the closure of Compton Buildings.

ComptonRoofs.com — Freephone 0800 318359, 10am to 4pm. Photos by WhatsApp on 07902 465165. Or use our contact page.

FAQs

When did Compton Buildings of Fenny Compton close?

The factory at Fenny Compton ceased production in the summer of 2011, less than three years after the company’s fiftieth anniversary in November 2008. Compton Buildings was founded in 1958 by Cyril Kyme.

How many Compton garages were built?

By 2009 the company was claiming to have built more concrete garages, sheds and workshops than anyone else, with over 500,000 buildings supplied. Several hundred thousand of those buildings are still standing today.

Is the Compton garage sold today made by the original company?

No. The Compton name later reappeared when a rival concrete manufacturer adopted the branding style. That product should not be confused with the original Compton Buildings of Fenny Compton, and it does not follow the original panel, door and roof specifications.

Can I still get parts for a Compton concrete garage?

Yes. We hold stocks of components that are otherwise hard to find for obsolete Compton buildings, including concrete panels, doors, locks, springs and roof supports. These are used on our own fitted work.

What does a replacement garage roof consist of?

Normally a single-skin box-profile steel system with anti-drip lining and a plastisol finish in a choice of colours, fixed at close centres for rigidity. It is low maintenance, has a typical life of up to 40 years and carries a five-year warranty. Most jobs are completed in a single day.

Do you remove asbestos garage roofs?

Yes. Our contractors are trained in asbestos awareness, Categories A and B. Material is removed to a licensed disposal depot in accordance with Environment Agency and hazardous waste requirements, we recycle wherever possible, and full disposal paperwork is provided.

Do you cover the whole of the UK?

Yes. Replacement roofs, repairs and improvements are fitted nationwide by time-served, approved contractors.

What do you need in order to quote for my garage?

Either a copy of your original paperwork, or the building’s width and length plus a few photographs. WhatsApp on 07902 465165 is the quickest way to send them, or call Freephone 0800 318359 between 10am and 4pm.

Posted on Leave a comment

Flat Garage Roof Leaking? Here’s Why a Patch Won’t Fix It

Patched garage roof that needs a replacement garage roof

You’ve noticed the puddle on the garage floor. Maybe there’s a damp patch creeping across the ceiling, or that familiar drip has started up again every time it rains. So you grab a tub of roof sealant, climb up the ladder, and patch it. Problem solved — until next month.

If this cycle sounds familiar, you’re not alone. We speak to homeowners across the Midlands every week who’ve been patching the same flat garage roof for years, spending more and more on temporary fixes that never quite hold. Here’s why patching rarely works long-term, and when it makes sense to stop repairing and start replacing.

Why Flat Garage Roofs Leak in the First Place

Most prefab concrete garages built from the 1960s through to the 1990s were fitted with flat or low-pitch roofs covered in mineral felt. At the time, it was standard practice. But felt has a limited lifespan — typically 10 to 15 years — and the majority of these roofs are now well past that.

Over time, several things happen:

  • The felt dries out and cracks. UV exposure and temperature changes cause the bitumen to become brittle. Once it cracks, water finds a way in.
  • Seams and overlaps lift. Felt is laid in strips with overlapping joints. As the adhesive ages, these joints open up — especially around the edges and where sheets meet the wall.
  • Ponding water accelerates the damage. Flat roofs don’t shed water like pitched ones. Standing water sits on the surface, working its way into every crack and weak spot.
  • The timber beneath starts to rot. This is the part most people don’t see until it’s too late. By the time you notice a leak inside, the battens and boards underneath have often been absorbing moisture for months.

The Problem With Patching

We completely understand the appeal of a quick patch. It’s cheap, it’s fast, and it stops the drip — for now. But here’s what’s actually happening when you patch an ageing flat roof:

You’re Fixing the Symptom, Not the Cause

A patch covers the spot where water is getting through today. But if the felt is 20 or 30 years old, it’s deteriorating everywhere — not just where you can see the leak. Seal one crack and the water simply finds the next weakest point. It might take a week, or it might take a few months, but it will leak again.

Sealant Doesn’t Bond Well to Old Felt

Roof sealants and bitumen-based repair compounds need a clean, sound surface to adhere to. Old felt is typically dusty, mossy, and crumbling. Even if you clean the area first, the sealant is bonding to material that’s already failing. It’s like painting over rotten wood.

Each Patch Adds Weight and Traps Moisture

Every layer of sealant, felt patch, or liquid rubber you apply adds weight to a roof structure that was only designed to carry the original covering. Worse, patches can trap moisture between layers, accelerating rot in the timber frame beneath — the very structure holding your roof up.

The Cost Adds Up Quickly

A single tube of roof sealant might cost £10–15. But by the time you’ve bought sealant three or four times, paid someone to go up and apply it, and then done it all again the following year, you’ve spent a significant chunk of what a proper replacement would have cost — and you’ve still got the same failing roof.

When Does a Patch Make Sense?

We’re not saying every leak needs a full replacement. A patch can be a sensible short-term fix if:

  • The felt is relatively new (under 10 years old) and the damage is isolated — for example, from a fallen branch.
  • There’s a single, clearly identifiable entry point with sound material around it.
  • You need to stop water ingress temporarily while you arrange a proper replacement.

But if you’re on your second or third patch, or if the felt is visibly cracked, blistered, or lifting in multiple places, you’re past the point where repairs make financial sense.

What a Proper Replacement Looks Like

A replacement garage roof isn’t just new felt on top of the old. Done properly, it involves:

  • Stripping the old covering completely — including any previous patches and layers of sealant.
  • Inspecting and replacing damaged timbers — any rotten battens or boards are swapped out.
  • Fitting new, modern roofing materials — steel box-profile sheets with anti-drip lining, flashings, cappings, and finishing trims.
  • Proper disposal of the old roof — older felt may contain asbestos and must be disposed of at licensed facilities in accordance with hazardous waste regulations.

A quality replacement roof using 0.7mm gauge plastisol-coated steel can last up to 40 years. Compare that to patching felt every year or two and the maths speaks for itself.

How to Tell If Your Garage Roof Needs Replacing

Here are the signs we see most often when we visit properties across Derby, Nottingham, Leicester, Sheffield, and the wider Midlands:

  • Repeated leaks — if you’ve patched it more than once, the roof is telling you something.
  • Visible cracks or blisters in the felt — run your hand across it; if it feels brittle or crumbles, it’s done.
  • Sagging or dipping sections — this suggests the timber underneath has weakened.
  • Daylight visible from inside — if you can see light through the roof boards, water is definitely getting in.
  • Moss and plant growth — moss holds moisture against the surface and accelerates deterioration.
  • Damp smell inside the garage — even without a visible leak, persistent dampness means moisture is getting through somewhere.

If two or more of these apply, it’s almost certainly time to replace rather than repair.

Stop Patching. Start Planning.

We’ve been replacing garage roofs across the Midlands for nearly 40 years. We know Compton Buildings, Lidget Compton, Hanson, and every other prefab brand inside out — and we know that a properly fitted replacement roof is always better value than years of patching.

We provide fixed prices with no surprises, and our Price Match Promise means we’ll never knowingly be beaten on price.

Ready to stop the cycle? Get in touch for a no-obligation quote — call us, message us on WhatsApp, or fill in our contact form. We’ll give you an honest assessment and a fixed price.

#BetterBuyCompton

Posted on Leave a comment

Why Opting for Cheap Garage Roofs Could Lead to Higher Maintenance Costs

The compton roofs team sectioning out the demolition of an existing old garage roof structure.

Cheap garage roofs might seem like a smart way to save money upfront, but they often lead to higher maintenance costs down the line. If you’re planning a garage roof replacement or thinking about DIY garage roofs, understanding the long-term expenses is key. This post breaks down how roofing materials affect your budget and why cost-effective roofing isn’t always about the lowest price. Keep reading to learn what really impacts your wallet over time. For more information on garage roof replacement costs, visit Compton Roofs.

The True Cost of Cheap Garage Roofs

Understanding Initial Savings vs Long-Term Expenses

When you choose cheap garage roofs, the initial price looks attractive. You save money today. But what about tomorrow?

  • Low-grade felt tears easily in wind
  • Thin corrugated sheets crack under weight
  • Poor sealants let water through within months
  • Substandard fixings rust and loosen quickly

These problems don’t wait years to appear. Many surface within the first twelve months.

How Material Quality Affects Your Budget

Quality roofing materials cost more initially. But they last longer. They require fewer repairs. They protect your garage better.

Cheap garage roofs use materials that cut corners. Manufacturers reduce thickness. They use lower-grade components. They skip protective coatings.

The result? Your roof deteriorates faster. Weather damage happens sooner. You’re calling contractors before you expected.

Cost-effective roofing means choosing materials that balance price with performance. Not just the cheapest option available.

Common Problems with Budget Roofing Materials

Water Damage and Leaks

Water is your garage roof’s biggest enemy. Cheap materials don’t handle moisture well.

Budget felt absorbs water like a sponge. It swells, weakens, and tears. Bargain sealants crack in cold weather. Water finds its way through.

Once water enters your garage:

  • Stored items get damaged
  • Wood structures rot
  • Metal parts corrode
  • Electrical systems become dangerous
  • Mould grows on walls and ceilings

Fixing water damage costs far more than the roof itself. One serious leak can destroy thousands of pounds worth of belongings.

Structural Stress and Sagging

Thin roofing materials lack strength. They sag between supports. They bend under snow weight. They flex in strong winds.

This creates several problems. Sagging collects water in pools. Pooled water adds weight. Extra weight causes more sagging.

You end up in a damaging cycle. The roof gets worse each season. Eventually, you need complete garage roof replacement.

Quality materials maintain their shape. They distribute weight properly. They last through harsh weather without bending.

Temperature Extremes and Material Breakdown

British weather swings from cold winters to warm summers. Cheap garage roofs struggle with these changes.

Budget materials expand and contract more than quality alternatives. This movement:

  • Cracks sealants along joints
  • Loosens fixings over time
  • Creates gaps where wind enters
  • Allows moisture penetration
  • Weakens the overall structure

Each temperature cycle damages your roof a bit more. After a few years, maintenance costs spiral upward.

The Hidden Maintenance Costs Nobody Mentions

Regular Repair Frequency

With cheap garage roofs, repairs become routine. You’re not fixing once every decade. You’re patching problems every year or two.

Each repair visit costs money. Contractors charge call-out fees. Materials aren’t free. Your time has value too.

Add up these repeated expenses. They quickly exceed what you saved initially.

Quality roofs need minimal attention. An annual inspection catches small issues. Major repairs wait years before becoming necessary.

Emergency Repair Premiums

Cheap roofs fail at inconvenient times. A storm tears loose panels. Heavy rain floods through cracks. Snow collapses weakened sections.

Emergency repairs cost more than planned work. Contractors charge premium rates. You can’t wait for quotes. You need immediate fixes.

These unexpected bills hurt your budget. They come when you least expect them. They’re completely avoidable with better initial choices.

Replacement Comes Sooner

The worst hidden cost? Complete garage roof replacement arrives years earlier than expected.

Budget roofs last perhaps five to seven years. Quality installations serve you for twenty years or more.

That’s two or three complete replacements versus one. The maths isn’t complicated. Cheap garage roofs cost far more over time.

Why DIY Garage Roofs Need Quality Materials

The DIY Temptation

Many homeowners consider DIY garage roofs. You save on labour costs. You work at your own pace. You feel accomplished.

But DIY only saves money with the right approach. Using cheap materials undermines your efforts.

Your time and labour deserve quality materials. Don’t waste your weekend installing a roof that fails quickly.

Skills Can’t Compensate for Poor Materials

Even expert installation can’t fix inferior roofing materials. You might:

  • Seal every joint perfectly
  • Fix every sheet securely
  • Follow instructions exactly
  • Work with great care

But if the materials are substandard, problems still emerge. The roof still fails prematurely. Your careful work gets wasted.

Getting DIY Right

Successful DIY garage roofs combine decent materials with proper technique. Don’t scrimp on supplies. Buy mid-range or better products.

Research thoroughly before starting. Watch tutorials. Read manufacturer guidelines. Ask questions at builder’s merchants.

Consider these points:

  • Quality materials are easier to work with
  • Better products forgive minor mistakes
  • Proper supplies look better when finished
  • Good roofs add value to your property

DIY with quality materials beats professional installation of cheap garage roofs. You get better results. You avoid long-term expenses.

What Makes Roofing Materials Cost-Effective?

Longevity and Durability

Cost-effective roofing lasts longer. That’s the primary factor. A roof serving twenty years costs less annually than one lasting seven years.

Look for materials rated for extended lifespans. Check manufacturer warranties. Read independent reviews.

Durable materials resist:

  • UV radiation from sunlight
  • Freeze-thaw cycles
  • Wind uplift forces
  • Impact from falling debris
  • Chemical damage from pollution

Weather Resistance

British weather tests every roof. Rain, wind, snow, and sun all take their toll.

Quality roofing materials handle these challenges. They’re designed for our climate. They use protective coatings. They resist moisture penetration.

Cheap alternatives often come from warmer, drier climates. They’re not built for British conditions. They fail faster here.

Ease of Maintenance

Cost-effective roofing needs minimal upkeep. An annual inspection suffices. Occasional cleaning keeps things tidy.

Budget materials demand constant attention. You’re always patching, sealing, or replacing sections. This ongoing work adds up.

Choose materials that look after themselves. Your future self will thank you.

Calculating Real Garage Roof Replacement Costs

Beyond the Initial Quote

When comparing quotes, look past the first number. Ask about expected lifespan. Request maintenance requirements. Enquire about warranty terms.

A £1,500 roof lasting seven years costs £214 annually. A £3,000 roof lasting twenty years costs £150 annually. The expensive option saves money.

Factor in maintenance costs too. Budget an extra £100 yearly for cheap garage roofs. Quality roofs might need £20 annually.

Total Cost of Ownership

Smart buyers calculate total cost of ownership. This includes:

  • Initial installation price
  • Annual maintenance expenses
  • Repair costs over the lifespan
  • Replacement timing
  • Energy efficiency impacts

Cheap garage roofs score poorly on every measure. They cost more initially than you’d think. Maintenance adds up quickly. Repairs become frequent. Replacement comes sooner.

Quality installations look expensive at first. But they deliver better value across their lifetime.

Getting Accurate Quotes

Request detailed quotes from multiple contractors. Specify the materials you want. Ask for breakdowns showing labour and materials separately.

Don’t automatically accept the lowest bid. Question why it’s cheaper. Are they using inferior materials? Cutting corners on preparation? Skipping important steps?

A slightly higher quote often represents better value. You’re paying for quality work and proper materials.

Posted on Leave a comment

Foundations Required for Garages: A Complete Guide for Garage Replacement Projects

Garage Foundations for a new or replacement garage.

When planning a garage replacement, one of the most critical (and often overlooked) elements is the foundation. A well-designed foundation ensures structural integrity, longevity, and compliance with local building regulations. Whether you’re replacing an old garage or building a new one from scratch, understanding the right foundation type is essential for a successful project.

This guide explains everything you need to know about garage foundations, with a strong focus on SEO-friendly insights for garage replacements.


Why Foundations Matter in Garage Replacement

A garage foundation does far more than just support the structure. It:

  • Distributes the weight of the building evenly
  • Prevents subsidence and cracking
  • Protects against moisture and ground movement
  • Ensures compliance with UK building standards

When replacing an existing garage, the condition of the old foundation will determine whether it can be reused or must be completely rebuilt.


Can You Reuse an Existing Garage Foundation?

In some garage replacement projects, homeowners hope to reuse the existing base to save time and money. However, this is only possible if the foundation:

  • Is structurally sound with no cracks or sinking
  • Meets current building regulations
  • Is suitable for the new garage design (especially if upgrading materials)

In many cases—particularly with older garages—a new foundation is recommended to avoid future structural issues.


Types of Garage Foundations

Choosing the right foundation depends on soil conditions, garage size, and intended use. Below are the most common types used in garage replacement projects.

1. Concrete Slab Foundation

concrete slab is the most popular choice for garage replacements in the UK.

Key Features:

  • Single layer of poured concrete
  • Typically 100–150mm thick
  • Reinforced with steel mesh

Benefits:

  • Cost-effective
  • Quick to install
  • Suitable for most standard garages

Best For:

  • Detached garages
  • Flat, stable ground conditions

2. Trench Fill Foundation

A trench fill foundation involves digging trenches and filling them with concrete to support load-bearing walls.

Key Features:

  • Deep trenches (usually 600mm+)
  • Filled entirely with concrete

Benefits:

  • Strong and durable
  • Ideal for poor soil conditions
  • Reduces need for brickwork below ground

Best For:

  • Heavier garage structures (e.g., brick garages)
  • Areas with unstable soil

3. Raft Foundation

A raft foundation spreads the load across a large concrete slab reinforced with steel.

Key Features:

  • Covers entire footprint of the garage
  • Reinforced to handle ground movement

Benefits:

  • Excellent for weak or shifting soil
  • Minimises risk of cracking

Best For:

  • Sites with clay or variable soil conditions
  • Larger or heavier garage replacements

4. Pad Foundations

Pad foundations use isolated concrete pads to support structural points.

Key Features:

  • Individual pads under load-bearing points
  • Connected by ground beams

Benefits:

  • Uses less concrete
  • Suitable for lightweight structures

Best For:

  • Timber garages or sectional garages
  • Smaller builds

Key Considerations for Garage Replacement Foundations

1. Ground Conditions

Soil type plays a major role in determining foundation depth and type. Clay soils, for example, expand and contract, requiring deeper or reinforced foundations.


2. Drainage and Moisture Control

Proper drainage is essential to prevent water damage. A damp-proof membrane (DPM) is typically installed beneath the concrete slab.


3. Load Requirements

If you’re upgrading from a lightweight prefab garage to a brick or insulated structure, the foundation must support the additional weight.


4. Building Regulations (UK)

Garage foundations must comply with local building regulations, especially if:

  • The garage is attached to a house
  • It includes electrical installations
  • It will be used as a workshop or living space

Always check with your local authority before starting a garage replacement project.


Common Mistakes to Avoid

  • Reusing a damaged foundation to save money
  • Incorrect depth for soil conditions
  • Skipping reinforcement in concrete slabs
  • Poor drainage planning
  • Ignoring building regulations

These mistakes can lead to costly repairs and structural failure.


Cost of Garage Foundations in the UK

The cost of a new garage foundation varies depending on size and type:

  • Concrete slab: £1,500 – £3,500
  • Trench fill: £2,000 – £5,000+
  • Raft foundation: £3,000 – £6,000+

While it may be tempting to cut costs, investing in a proper foundation is crucial for long-term durability.


SEO Tips for Garage Replacement Projects

If you’re a contractor or business targeting garage replacement customers, include these keywords naturally in your content:

  • Garage replacement foundation
  • New garage base cost UK
  • Concrete base for garage replacement
  • Garage rebuild foundation requirements
  • Replace old garage with new foundation

Creating informative content like this not only builds trust but also improves your search engine rankings.


Final Thoughts

A strong foundation is the backbone of any successful garage replacement. Whether you choose a concrete slab, trench fill, or raft foundation, the key is ensuring it matches your site conditions and structural needs.

If you’re unsure, consulting a structural engineer or experienced contractor can help you avoid costly mistakes and ensure your new garage stands the test of time.


Planning a garage replacement? Start from the ground up—literally.

Posted on Leave a comment

A buyers guide to concrete Sectional Garages and Workshops

How long does a replacement garage roof last?

A garage is an integral part of your property, it adorns the side of your property and its presence perhaps sets your property apart from your immediate neighbours. If it’s an eyesore it may diminish the value of your property whilst an independent survey by a leading Building Society has shown that your investment and more can be recouped with the addition of a new garage.   

You may only purchase a concrete building once or maybe twice in your lifetime and so our advice is to ignore the marketing ‘spin’ and make your informed choice using the following set of guidelines. 

Testimonials: Many of us may already have friends and relatives who have recently purchased such a building. Where did they buy it from? What is the brand of the garage? Did the whole transaction run smoothly? After all, acompany’s reputation is onlyas good as its last customer interaction. 

Construction: Not all garage companies offer the same level of installation and guarantee. Ensure that the concrete panels are mastic sealed, that an internal cement fillet is provided. One also imagines that if something as a simple a leak was reported the manufacturer would without quibble rectify the fault? Don’t hold your breathe, a guarantee rosette maybe brandished but some guarantee statements contain clauses designed to tie the consumer in a noose. 

Brand: Many of the components found within concrete buildings are household brand names with service and support to match. Enquire as to the brand of the main door for example, if you don’t recognise the name then walk away. Remaining on the subject of garage doors, do ensure that your door is supplied with a rigid steel frame.

Concrete Panels: Take a tape measure, not all concrete panels are alike. Accept nothing less than 2¾ inches thick reinforced and vibrated concrete panels. Enquire as to the weight of each panel, heaviest is best we suggest (2cwt per panel) furthermore ensure that your panels are securely bolted in at least at three-points.  

Services: In a good many instances you may require removal of your existing garage. Ensure that the contractors employed are fully trained asbestos workers and demolition operatives, and are fully licensed to remove all types of waste. They wear all of the required RPE/PPE (Respiratory/Personal Protective Equipment).

Payment: All manufacturers will request payment prior to delivery. Be wary of those looking for payment at instigation of order. Avoid paying in cash, cheque or debit card. If you have one available use a credit card in order to provide card protection for your purchase. 

Planning Permission: It is a common misconception that Planning Permission is not necessary for concrete buildings sectional and portable i.e. concrete garages, sheds and greenhouses. This simply isn’t true. Read on…

Usually, in the majority of situations, no. Planning permission is not normally required due to the nature of our product – i.e. “portable sectional building” – providing that the structure is within certain size and height limits which in turn are governed by the type and other aspects of your property. The usual criteria to meet to avoid planning permission are… 

• The proposed building is not in front of the building line. 

• The proposed building is under 30 sq. metres and under 70 cubic metres in volume (or 50 cubic metres for terrace houses or houses within a conservation area).

• Your property is not in a Conservation area or a listed building. 

• The building is less that 4m in height

• The property has few alternations (attached or within 5m distance)

Also recommended is the booklet: “Planning A Guide for Householders” by the Department of the Environment. It may be available in your local library. Often your Local Authority offers a free-of-charge Householders Enquiry Form where they will consider your proposals and formally respond. 

Removal of asbestos garages or corrugated asbestos roofing sheets: There is a common misconception that only a licensed removal agency or local authority can remove your tired asbestos garage. 

If you are contemplating replacement of your present prefabricated garage then it is very likely that this building contains asbestos cement or Chrysotile (‘white asbestos’). Asbestos cement normally contains from about 5% of white asbestos by weight. 

Asbestos is a naturally occurring mineral which was used within the concrete garage sector up until the late 1980s. Modern concrete garages no longer contain asbestos within their roof structure preferring to use reinforced cement fibre. Neither material can be identified by any markings and only chemical analysis will prove that asbestos is present. 

The mere presence of asbestos does not necessarily create a health risk and the removal of asbestos cement sheets is not governed by any regulatory body although it is strongly recommended that you/your appointed contractors adheres to safe working methods. 

  • Thoroughly douse the material before starting work. You are advised to introduce a suitable wetting agent such as washing-up liquid, into the water before saturation. 
  • Operatives are recommended to wear RPE/PPE (Respiratory/Personal Protective Equipment) to protect from inhalation of dust particles.
  • Avoid breaking asbestos panels unnecessarily but if this is necessary continue to wet down the area that you are working. 
Posted on Leave a comment

Maintaining you Concrete Garage

Maintaining your garage so that it stays at its best for years to come.

Compton Roofs guarantee the structural integrity of their concrete garages for a period of ten years from the date of purchase. Should any structural component fail during that period, Compton Roofs will repair or replace it at no cost to you provided that basic maintenance has been carried out. 

Like any item of value, it is important that certain components within your concrete garage receive periodic maintenance. 

Steel – mild steel roof trusses are manufactured and welded on site at by Compton Roofs concrete garages. Steel is primed with a water based primer before leaving the factory. This steel can be painted with Hammerite or a similar substance on site if required. 

Timber – all timber supplied is preservative treated in the factory. Preservative before manufacture by totally immersing the components ensuring maximum protection. We advise that all exposed timber should be re-treated annually with a suitable timber preservative.

Doors – all standard up and over garage and personnel access doors are galvanised steel with polyester powder coated primed finish, supplied to take the undercoat and top coat colour of your choice. 

If you are going to line your building or paint your garage floor or walls please pay particular attention to the drying process before starting. To accelerate the drying process use “dry” heat, electric heater for example. Do not use gas heaters as they generate moisture as they burn. De humidifiers can help but the main answer is to allow sufficient time for the drying process. 

Posted on Leave a comment

Embracing Technology in the Garage

Discover how your new garage can be transformed with the addition of modern technology.

How Modern Innovation Is Transforming Garage Spaces

The garage is no longer just a place to park your car or store unused household items. Today, garages are evolving into intelligent, multi-purpose spaces powered by modern technology. From smart security systems to energy-efficient lighting and connected tools, embracing technology in the garage can improve convenience, safety, productivity, and property value.

Whether you use your garage for storage, as a workshop, or as a home gym, integrating smart technology can significantly enhance how the space functions.


Smart Garage Doors and Access Control

One of the most impactful upgrades is installing a smart garage door system. Modern garage door openers can connect to your smartphone, allowing you to:

  • Open and close the door remotely
  • Receive real-time notifications
  • Set automatic closing schedules
  • Monitor access history

This technology improves both convenience and security. Homeowners no longer need to worry about leaving the garage door open, and deliveries can be placed securely inside when needed.

Keyless entry pads and biometric locks further enhance access control, eliminating the need for traditional keys.


Advanced Security and Surveillance

Garages often store valuable items such as vehicles, power tools, bicycles, and equipment. Integrating security technology provides peace of mind.

Modern security options include:

  • Motion-activated CCTV cameras
  • Smart floodlights
  • Door and window sensors
  • Alarm systems connected to mobile devices

These systems can send instant alerts if unusual activity is detected. High-definition cameras with night vision capabilities allow for 24/7 monitoring, even in low-light conditions.

For detached garages or sectional concrete buildings, wireless security systems make installation straightforward without extensive rewiring.


Energy-Efficient Lighting and Climate Control

Lighting plays a critical role in both safety and usability. Replacing outdated bulbs with LED lighting systems offers several advantages:

  • Lower energy consumption
  • Brighter illumination
  • Longer lifespan
  • Reduced maintenance

Smart lighting systems can be voice-controlled or automated through motion sensors. This is especially useful in garages where hands are often full.

If the garage is insulated and used as a workspace, climate control technology becomes essential. Options include:

  • Smart electric heaters
  • Programmable thermostats
  • Ventilation systems to reduce condensation
  • Dehumidifiers with humidity sensors

These systems help maintain a stable temperature and protect tools, vehicles, and stored items from moisture damage.


Smart Storage and Organisation Systems

Technology is also improving how garages are organised. Digital inventory systems allow homeowners to catalogue stored items using mobile apps. QR labels and smart shelving systems can help track tools, seasonal equipment, and spare parts.

Wall-mounted charging stations for electric vehicles (EVs) are becoming increasingly common. As EV adoption grows, installing a dedicated home charging point in the garage adds both practicality and property appeal.

Power management systems can also monitor energy usage, helping homeowners control electricity costs.


Connected Tools and Workshop Technology

For those using the garage as a workshop, connected tools and digital systems can dramatically improve efficiency.

Examples include:

  • Bluetooth-enabled power tools
  • Laser measuring devices
  • Smart workbenches with integrated charging ports
  • Tablet-mounted design software for project planning

Dust extraction systems with automatic activation sensors improve air quality and cleanliness. Combined with smart ventilation, this creates a healthier working environment.


Increasing Property Value with Garage Technology

Modern buyers increasingly value homes equipped with smart features. A garage fitted with:

  • Smart access systems
  • EV charging capability
  • Integrated security
  • Energy-efficient lighting

can make a property more attractive on the market.

Technology-enhanced garages demonstrate forward thinking and long-term usability, particularly as remote work and electric vehicle ownership continue to grow.


Future-Proofing Your Garage

Embracing technology in the garage is about more than convenience. It is about creating a secure, efficient, and adaptable space that meets modern needs.

Whether upgrading a traditional garage or installing a new sectional concrete building, integrating smart systems ensures the space remains relevant for years to come.

The garage has evolved. With the right technology, it can become one of the most functional and intelligent spaces in your home.